PRODUCTS
- Kelly Drilling Rig
- Continuous Fight Auger Rig
- Large Dia.DTH Rig
- Deep Soil Mixing Rig
- Hydraulic Impact Hammer Rig
- Vibratory Hammers
- FAHH Hydrohammer
- Casing Rotator
- Water Recovery & Slurry Control Filter Press
- Vaccum Self Prime Sand Pump
- Vertical Drains installation rig
- Multiple purpose Micro-Piling Rig
- Desander
- Casing Oscillator
- pile breaker & Pump station
- Jet Grouting pump
- Trailer-Mounted Concrete Pumps
- Tools & Accessories
- Foundation drilling tools
- Hydraulic & Electric spare parts
- Anchors and Wedges
- Pump concrete mixing
- Truck mounted concrete pump
- Different Function Interchange
- Minerals Chenical, Detergent Chenical（Agent）
FAR150MR HIH - Technical Data
| IMPACTING HAMMER(Optional) | ||
| RAM Weight | tons | 3 |
| Minimum Stroke | mm | 200 |
| Maximum Stroke | mm | 1000 |
| Maximum Potential Energy | ton | 3.6 |
| Blow Rate at maximum stroke | bpm | 42 |
| Operating Pressure | bar | 180 |
| Required Flow Rate | Ipm | 170 |
| Height of Hammer | mm | 1060 |
| Width of Hammer | mm | 900 |
| Length of Hammer | mm | 4020 |
| Hammer weight | kg | 4500 |
| Drive Cap | kg | 1000 |
| Suitable Power Pack | Optional | |
| MAST | ||
| Mast raking forward | ° | 5 |
| Mast side forward | ° | ±5 |
| Mast raking backforward | ° | 15 |
| UNDERCARRIAGE(CAT323D) | ||
| Crawlers Length | mm | 4910 |
| Crawlers Width | mm | 3000-4300 |
| DIESEL ENGINE(CAT C6.4) | ||
| Rated power | kW (HP) | 110（150hp） |
| HYDRAULIC PUMPS | ||
| Main pumps | mpa | 35 |
| Auxiliary pumps | mpa | 4 |
| MAIN WINCH | ||
| 1st Layer nominal line pull | kN | 200 |
| 1st Layer nominal rope speed | m/min | 70 |
| Rope diameter | mm | 28 |
| SERVICE WINCH | ||
| 1st Layer nominal line pull | Kn | 76 |
| 1st Layer nominal rope speed | m/min | 70 |
| Rope diameter | mm | 20 |
| WINCH CROWD | ||
| Crowd force(pull down/pull up) | kN | 150/160 |
| Pull down stroke | mm | 12000 |
| DIMENSION&WEIGHT | ||
| Transport width | mm | 3000 |
| Transport height | mm | 3021 |
| Transport length | mm | 13135 |
| Weight | ton | 39 |
| Min working radius | mm | 4060 |
SERIESHIH
FOUNDATION TECHNOLOGIES
