FAR380MR HIH - Technical Data
| IMPACTING HAMMER(Optional) | ||
| RAM Weight | tons | 9 |
| Minimum Stroke | mm | 200 |
| Maximum Stroke | mm | 1200 |
| Maximum Potential Energy | ton | 7.5 |
| Blow Rate at maximum stroke | bpm | 42 |
| Operating Pressure | bar | 180 |
| Required Flow Rate | Ipm | 170 |
| Height of Hammer | mm | 1500 |
| Width of Hammer | mm | 1400 |
| Length of Hammer | mm | 7400 |
| Hammer weight | kg | 13500 |
| Drive Cap | kg | 3000 |
| Suitable Power Pack | Optional | |
| MAST | ||
| Mast raking forward | ° | 5 |
| Mast side forward | ° | ±5 |
| Mast raking backforward | ° | 7 |
| UNDERCARRIAGE(Chinese local produced) | ||
| Crawlers Length | mm | 6850 |
| Crawlers Width | mm | 4000-5000 |
| DIESEL ENGINE(CumminsQSX15) | ||
| Rated power | kW (HP) | 373(507hp) |
| HYDRAULIC PUMPS | ||
| Main pumps | mpa | 34 |
| Auxiliary pumps | mpa | 4 |
| MAIN WINCH | ||
| 1st Layer nominal line pull | kN | 320 |
| 1st Layer nominal rope speed | m/min | 65 |
| Rope diameter | mm | 36 |
| SERVICE WINCH | ||
| 1st Layer nominal line pull | Kn | 115 |
| 1st Layer nominal rope speed | m/min | 85 |
| Rope diameter | mm | 20 |
| WINCH CROWD | ||
| Crowd force(pull down/pull up) | kN | 330/375 |
| Pull down stroke | mm | 27000 |
| DIMENSION&WEIGHT | ||
| Transport width | mm | 4000 |
| Transport height | mm | 3382 |
| Transport length | mm | 18895 |
| Weight | ton | 135 |
| Operating height | mm | 25106 |
SERIESHIH
FOUNDATION TECHNOLOGIES
